ElastiKote 100 Base and Top Coat

ElastiKote 100 is available in white, black, silver, light gray, clear, and custom colors in 5–gallon pails or 50–gallon (net by weight) drums. ElastiKote® 100 is a flexible, high performance, watertight, puncture resistant ready-to-use single component fluid-applied styrene ethylene butylene styrene (SEBS) liquid resin used in the restoration of roof substrates.
Product Data PDF
SDS
 

Full Description

ElastiKote® 100 is a flexible, high performance, watertight, puncture resistant ready-to-use single component fluid-applied styrene ethylene butylene styrene (SEBS) liquid resin used in the restoration of roof substrates such as: EPDM, EIFS, Hypalon®, ISO Board, Spray Polyurethane Foam, PVC, TPO, Galvanized Metal, Plywood, Concrete, Aluminum, Smooth Surfaced Coal Tar Pitch BUR, Granular Surfaced SBS Modified Bitumen, and Smooth Surfaced Asphalt BUR. Although ElastiKote 100 can be used on asphalt roof substrates, the recommended protocol is ElastiKote 100 SB and 100 XP. For further information refer to those Product Data Sheets. ElastiKote 100 having a Solar Reflective Index of 107 enables the owner to maximize energy savings. To promote long lasting protection, ElastiKote 100 is formulated to minimize ozone and UV radiation degradation vulnerability. ElastiKote 100 is available in white, black, silver, light gray, clear, and custom colors in 5–gallon pails or 50–gallon (net by weight) drums. ElastiKote 100 is manufactured in our ISO 9001:2008 Registered facility located in Smithville, Ohio.

Technical Information

Physical Properties

Physical State Viscous liquid
Viscosity @ 73.4˚F, KU 133
VOC, g/l <500
Solar Reflectance Index (white only) 107
Solar Reflectivity 0.85
Thermal Emittance 0.90
Shelf Life (in unopened container) 2 years

FILM PROPERTIES

Initial Tensile Strength, psi 1,102.9
Tear Resistance lb/in 193.53
Initial Percent Elongation (break) % 678.2
Permeance, perms 0.393
Water Swelling, Mass % 0.81
Wet Adhesion to Aluminum, pli 2.91
Wet Adhesion to Concrete, pli 4.0
Wet Adhesion to EIFS, pli 6.97
Wet Adhesion to EPDM, pli 4.09
Wet Adhesion to Galvanized Metal, pli 2.25
Wet Adhesion to Hypalon, pli 2.74
Wet Adhesion to ISO Board, pli 2.65
Wet Adhesion to Plywood, pli 4.19
Wet Adhesion to PVC, pli 4.0
Wet Adhesion to Spray Polyurethane Foam, pli 3.4
Wet Adhesion to TPO, pli 8.3
Fungi Resistance, rating 0

FILM PROPERTIES AFTER (1000 HOURS ACCELERATED WEATHERING)

Final Percent Elongation (break) % 363.8
Accelerated Weathering 1000 hrs Pass, No cracking or checking
Low Temperature Flexibility Pass
Wind Driven Rain Pass