ElastiKote 1000 Base and Top Coat

ElastiKote® 1000 is a flexible, high performance, watertight, puncture resistant ready-to-use single component fluid-applied styrene ethylene butylene styrene (SEBS) liquid resin used in the restoration of roof substrates.
Product Data PDF
(Clear) Product Data PDF
SDS
 

Full Description

ElastiKote® 1000 is a flexible, high performance, watertight, puncture resistant ready-to-use single component fluid-applied styrene ethylene butylene styrene (SEBS) liquid resin used in the restoration of roof substrates such as: EPDM, EIFS, Hypalon®, KEE (Elvaloy®), Spray Polyurethane Foam, PVC TPO Galvanized Metal Plywood Concrete, Kynar Aluminum Smooth Surfaced Coal, Tar Pitch BUR, Granular Surfaced SBS Modified, Bitumen, and Smooth Surfaced Asphalt BUR

 
Although ElastiKote 1000 can be used on asphalt roof substrates, the recommended protocol is Elastikote Select Primer followed by Elastikote 1000. For further information refer to those Product Data Sheets. ElastiKote 1000 having a Solar Reflective Index of 108 enables the owner to maximize energy savings. To promote long lasting protection, ElastiKote 1000 is formulated to minimize ozone and UV radiation degradation vulnerability. ElastiKote 1000 is available in white, black, silver, light gray, clear, and custom colors in 5–gallon pails or 50–gallon (net by weight) drums.

Technical Information

Unless otherwise stated, results are per ASTM D 6083 laboratory testing.
1 Fully cured sample per laboratory testing
2 Tested with ElastiKote 1000, refer to the ElastiKote 1000 SB & XP Product Data Sheets for recommended protocol results
3 Tested without primer
4 Tested with primer
* Colors not guaranteed against color shift

 

PHYSICAL PROPERTIES

Physical State Viscous liquid
Viscosity @ 77˚ F, cps 5,000 +/-500
VOC < 250 g/l
Solar Reflectance Index (white only) 108 (Initial), 80 (3 yr)
Shelf Life (in unopened container) 2 years

FILM PROPERTIES

Initial Tensile Strength @ 73˚ F, psi 1502
Tear Resistance lb/in 208
Initial Elongation @ 73˚ F, % 1069 (2 weeks cure time)
Initial Elongation @ 73˚ F, % fully cured 11240
Permeance, perms 2.7 (2 weeks cure time)
Permeance, perms, fully cured 1 0.08
Water Swelling, Mass % 0
Wet Adhesion to Aluminum, pli 4.05
Wet Adhesion to Concrete, pli 7.5
Wet Adhesion to EIFS, pli 7.96
Wet Adhesion to EPDM, pli 3.4
Wet Adhesion to Galvanized Metal. pli 6.1
Wet Adhesion to Hypalon, pli 7.0
Wet Adhesion to KEE, pli 2.1
Wet Adhesion to Kynar coated metal, pli 3 8.66 or 4 12.69
Wet Adhesion to PVC, pli 6.8
Wet Adhesion to Spray Polyurethane Foam, pli 3.4
Wet Adhesion to TPO, pli 10.5
Wet Adhesion to granular surfaced SBS Modified Bitumen, pli 2 5.4
Wet Adhesion to smooth surfaced asphalt BUR, pli 2 2.8
Wet Adhesion to smooth surfaced Coal Tar Pitch BUR, pli 2 2.5
Fungi Resistance, rating 0

FILM PROPERTIES (AFTER 1000 HOURS ACCELERATED WEATHERING)

Elongation @ 73˚ F, % 1029
Low Temperature Flex Pass
Appearance after 1000 hrs accelerated weathering Pass
Wind Driven Rain Pass