ElastiKote 5000 Labor Sav’R Mastic

ElastiKote 5000 Labor Sav’R™ Mastic is an environmentally responsible low VOC, flexible, high performance, watertight, puncture resistant ready-to-use single component reinforced fluid-applied styrene ethylene butylene styrene (SEBS) liquid resin.
Product Data PDF
SDS
Labor Sav'r
 

Full Description

ElastiKote 5000 Labor Sav’R™ Mastic is an environmentally responsible low VOC, flexible, high performance, watertight, puncture resistant ready-to-use single component reinforced fluid-applied styrene ethylene butylene styrene (SEBS) liquid resin. It is used in various restoration and waterproofing liquid applied membrane applications. (product is designed to conserve labor expense) ElastiKote 5000 Labor Sav’R Mastic incorporates special high performance reinforcement fibers to increase strain energy properties. No additional reinforcement scrim is needed to form a monolithic, self-flashing and self adhering reinforced waterproofing membrane for a variety of roofing recovery applications such as:EPDM, Granular Surfaced SBS Modified Bitumen, Hypalon®, KEE (Elvaloy®), PVC, Smooth Surfaced Asphalt BUR, Galvanized Metal, Plywood, TPO, Smooth Surfaced Coal Tar Pitch BUR, Spray Polyurethane Foam, and Concrete.

 
ElastiKote 5000 Labor Sav’R Mastic can be utilized in the following applications:
• Excellent choice for stand-alone maintenance leak repair
• Metal roofs, at seams, penetrations, flashings (@ 90˚ angles)
• Restoration repair and reinforcement of expansion joints, transitions, curbs and flashings, vertical and horizontal seams
• Pitch pockets
• Single Ply, Modified Bitumen, EPDM, and Built Up Roof (BUR) seam repair

 
To promote long lasting protection, ElastiKote 5000 Labor Sav’R Mastic is formulated to minimize ozone and UV radiation degradation vulnerability. ElastiKote 5000 Labor Sav’R Mastic is available in white or silver in 2.5 or 5–gallon resealable pails or 50–gallon (net by weight) drums. ElastiKote 5000 Labor Sav’R Mastic is manufactured in our ISO 9001:2008 Registered facility located in Seville, Ohio

Technical Information

Physical Properties

Viscosity (cps) 400,000 +/- 50,000
VOC <50 g/l
Odor Low aromatic (masked)
Density at 77° F 7.5 lb/gal +/- 0.5
UV Resistant Yes
Permeance 2.88 perms
Application Caulking tube assembly, Brush Roller, or Trowel
Coverage 22 – 26 sq ft/ gal

Approx. 45 – 50 linear ft/gal of 4” wide BAND by 3/16” depth depending on substrate

 
For proper maximum strength always apply at a minimum thickness of 3/16” wet