hyload-multi

HyDrain 200

A prefabricated product that consists of a solid, formed, three dimensional core covered with a nonwoven polypropylene filter fabric. The fabric is bonded to each dimple and retains soil particles while allowing maximum water collection into the drainage core. The core provides an uninterrupted path for water to flow to designated drainage exits.
Tech Data PDF
 

Product Highlights

  1. Moderate compression strength and flow rate
  2. Manufactured with recycled materials
  3. HyDrain 200 products are environmentally friendly and can contribute toward LEED design credits
  4. Ideal for light commercial and residential applications
  5. Functions as a protection course
  6. Manage storm water runoff
  7. Help effectively manage site issues
  8. Designed to withstand the additional stress demands associated with horizontal applications

Applications and Packaging

Applications

  • Plaza Decks
  • Vertical Foundation Walls
  • Parking Decks
  • Planter Applications

Packaging

  • 4’ x 50’ Rolls
  • 28 lbs per roll
  • 6 Rolls per pallet


Technical Data

FABRIC
MaterialPPPP
Water Flow RateD-4491gpm/ft 2
Lpm/m 2
165
6,724
Grab Tensile StrengthD4632Lbs. N100
445
CBR PunctureD-6241Lbs. N275
1.22
Apparent Opening SizeD-4751sieve
mm
70
0.210
PermittivityD-4491Sec-12.4
Grab ElongationD-4632%65
UV ResistanceD-4355% / 500 HRS70
CORE
Material HIPS
ThicknessD-5199in
mm
0.25
6.35
Compressive StrengthD-1621
D-6364
psf
kPa
psf
kPa
11,000
527
1,000
527
In-Plane Flow RateD-4716gpm/ft
Lpm/m
12.5
155
Recycled Content>70%

1- PP = Polypropylene; HIPS = High Impact Polystyrene
2 – Flow rates tested @ 3600 psf (172 kPa) compressive load. Installed horizontal flow with concrete sand overburden tested at a hydraulic gradient of0.05. Maximum in-plane flow rate tested at a hydraulic gradient of 1.0

Installation

  • Limit unpackaged material UV exposure to a cumulative maximum of 14 days during installation.
  • Do not install materials during high wind events.
  • Do not install materials when ambient temperatures are below 20 degrees Fahrenheit or above 100 degrees Fahrenheit.
  • Do not expose materials to chemicals that are strong acids, strong bases, or high in solvents content
  • Protect materials from site construction damage, flames, and other environmental conditions that may damage the materials.