hyload-multi

HyDrain 650

A prefabricated product that consists of a solid, formed, three dimensional core covered with a geotextile filter fabric bonded to the dimple side of the core. The filter fabric is securely bonded to prevent soil intrusion into the core flow channel while allowing water to freely enter the drainage core. Sheet drains allow water entry from one side and are typically used to collect and re-direct water from below the growing medium of a green roof system.
Tech Data PDF
 

Product Highlights

  1. Prefabricated drains are designed with all the essential system elements needed for a successful roof garden
  2. Manufactured with recycled materials
  3. HyDrain 650 products are environmentally friendly and can contribute toward LEED design credits
  4. HyDrain 650 offers value solutions for sustainability and water management designs
  5. Increase water efficiency
  6. Manage storm water runoff
  7. Help effectively manage site issues
  8. Designed to withstand the additional stress demands associated with horizontal applications

Applications and Packaging

Applications

  • Plaza Decks
  • Roof Decks
  • Parking Decks
  • Planter Applications
  • Vertical Applications

Packaging

  • 4’ x 50’ Rolls
  • 6 Rolls per pallet
  • 48 lbs. per roll


Technical Data

FABRIC
Material 1PPPP
Water Flow RateD-4491gpm/ft 2
Lpm/m 2
160
6,520
Grab Tensile StrengthD4632Lbs. N365 x 220
1,624 x 890
PermittivityD-4491sec-12.1
Apparent Opening SizeD-4751sieve
mm
40
0.430
Grab ElongationD-4632%15
UV ResistanceD-4355% / 500 HRS90
CORE
Material 1HIPS
ThicknessD-1777in
mm
0.44
11
Compressive StrengthD-1621
D-6364
psf
kPa
psf
kPa
18,000
862
18,000
862
In-Plane Flow RateD-4716gpm/ft
Lpm/m
21
261
Recycled Content67%

1- PP = Polypropylene; HIPS = High Impact Polystyrene
2 – Flow rates tested @ 3600 psf (172 kPa) compressive load. Installed horizontal flow with concrete sand overburden tested at a hydraulic gradient of0.05. Maximum in-plane flow rate tested at a hydraulic gradient of 1.0

Installation and Warranty

  • Limit unpackaged material UV exposure to a cumulative maximum of 14 days during installation.
  • Do not install materials during high wind events.
  • Do not install materials when ambient temperatures are below 20 degrees Fahrenheit or above 100 degrees Fahrenheit.
  • Do not expose materials to chemicals that are strong acids, strong bases, or high in solvents content
  • Protect materials from site construction damage, flames, and other environmental conditions that may damage the materials.

Warranty

Hyload makes available to its customers several high performance product warranties.  Contact Hyload’s Corporate Office directly for details. A standard warranty is 10 years.