hyload-multi

HyProof with Fleece

A high performance, thermoplastic, coal tar elastomeric (CTEM) waterproofing membrane. Its primary components are coal tar pitch, PVC, and DuPont ® Elvaloy ® KEE resin with a 30-40 mil polyester fleece adhered to the back side.
Tech Data PDF
 

Product Highlights

  1. Seams can be hot air welded or sealed with Hyload Structural Sealant.
  2. Resistant to oils, greases, petroleum products, acids, bases, glycols, and many other chemicals.
  3. Will not support biological growth such as molds or algae.
  4. Will not allow root penetration.
  5. Can be applied horizontally under poured concrete or pavers.
  6. Can be used under a green roof, or vegetative garden, or garden wall.
  7. 2” selvedge on one side for easy welding.
  8. Can be adhered in cold ply adhesive or in hot asphalt.
  9. Compatible with most sealants and coatings.
  10. Can be used as blind side waterproofing.

Applications and Packaging

Applications

  • Vertical below grade
  • Horizontal underlayment
  • Under a vegetative system

Packaging

  • Black Colored Membrane
  • 38”’ x 50’ Rolls
  • 20 Rolls per pallet
  • Available in 60 and 75 mil membrane thickness
  • 95 lbs. per roll (60 mil)
  • 105 lbs. per roll (75 mil)


Substrates and Performance Properties

  • The substrate should be smooth, level, clean, and dry.
  • Include but not limited to Wood, Masonry, and Concrete.
  • Hyproof W/ Fleece can be installed directly over existing Hyload membranes without priming. Priming with Hyload Asphalt Primer or Hyload HyPrime is recommended on all other substrates.

Performance Properties

Tensile StrengthASTM D 6381300 psi min
Heat AgingASTM D 30451250 psi min
Low Temperature BandASTM D 2136PASS
Hydrostatic Pressure Resistance ASTM D 751290 psi*
Water AbsorptionASTM D 51470%
Water Vapor PermeanceASTM E 960.375 perm max
Puncture Permeance Federal Method 206550 lbs. min
Tear Resistance ASTM D 1004380 lb. / in min

Technical Data

Hyload provides technical data as well as installation instructions, details, and specification information to authorized waterproofing contractors, engineers, architects, and specifiers. This information can also be provided to designers in various formats used by engineering professionals. Contractor field training, as well as in-house instruction, is used to develop certified applicators nationwide. In conjunction with The Technical Department, field inspections are performed by Hyload Representatives trained to perform pre-bid, job progress, and final inspections.

Limitations and Warranty

  • Cannot be applied over a surface contaminated with dust or debris.
  • Cannot be used with cold tar mastic.
  • Must be rolled vertically using a small hand held rubber wheeled roller.
  • Must be rolled horizontally using a large water filled “garden” type roller, or a rubber coted “linoleum” type roller. Care MUST be taken not to penetrate the membrane while rolling.

Warranty

Hyload makes available to its customers several high performance product warranties.  Contact Hyload’s Corporate Office directly for details. A standard warranty is 10 years.