Use the options in the left column to filter results. By selecting the checkboxes results will be narrowed to the system type(s) or characteristic(s) chosen.
IKO AquaBarrier™ TG are torch applied SBS membranes designed for use as either the air/vapor barrier or waterproofing in building systems.
IKO AquaBarrier™ Tapes are self-adhering, cold-applied composite sheet membranes that provide an effective barrier against water, moisture vapor and air leakage in a variety of flashing details in all climates.
AquaBarrier™ TWF is made by integrally bonding a high density cross-woven film to SBS modified rubberized asphalt. It is a cold-applied, self-adhering sheet membrane designed to be used as a through wall flashing system. AquaBarrier™ TWF is used in adhered flashing application directly over masonry, concrete, gypsum, wood or metal substrates which have been properly primed.
The Hyload Flashing Membrane is a polymeric, reinforced membrane, incorporating DuPont’s Elvaloy® KEE polymer.
HyBond Primer is a blend of select asphalts, and refined solvents designed to penetrate porous surfaces and bind, chalky, dusty surfaces.
The Hyload EZ-Flash Membrane System is a combination of poly-reinforced membrane, incorporating DuPont’s Elvaloy® KEE polymer (40 mils) and an extruded termination bar, and drip-edge made from the same material, heat welded together in a system for easy installation.
The Hyload Jamb Closure Membrane is an 8” or 12” poly-reinforced membrane, incorporating DuPont’s Elvaloy® KEE polymer (40 mils) and 4” of rubberized asphalt (15 mils) with a silicone release paper.
A select blend of refined asphalt, aliphatic solvents, non-asbestos fibers and fillers.
A non- slump, self fixturing, moisture curing, polyether adhesive sealant.
The Hyload S/A Membrane is a composite membrane. The top layer is a 25-30 mil polymeric, reinforced membrane incorporating DuPont’s Elvaloy® KEE polymer. The bottom layer is 10 to 15 mils of high performance synthetic butyl adhesive. At one edge of the SA with Drip Edge Membrane,the butyl adhesive is held back 1-1⁄2”.The butyl adhesive layer is covered with a release paper, which is discarded after installation.