HyKote™ 5000 SEBS Roof Coatings
HyKote™ 5000 is an environmentally responsible low VOC, flexible, high performance, watertight, puncture resistant ready-to-use single component fluid-applied styrene ethylene butylene styrene (SEBS) liquid resin for commercial building roofs. It is used in the restoration of fiberglass skylights, top coats over colors, as well as roof substrates.
HyKote™ 5000 is an environmentally responsible low VOC, flexible, high performance, watertight, puncture resistant ready-to-use single component fluid-applied styrene ethylene butylene styrene (SEBS) liquid resin for commercial building roofs. It is used in the restoration of roof substrates such as: EPDM, PVC, Hypalon®, Spray Polyurethane Foam, Smooth Surfaced Asphalt BUR, TPO, Concrete, Galvanized Metal, Plywood, APP Mod-Bit Granule, Aluminum, Smooth Surfaced Coal Tar Pitch BUR, and Granular Surfaced SBS Modified Bitumen. Although HyKote™ 5000 can be used on asphalt roof substrates, the recommended protocol is HyKote™ Select Primer followed by HyKote™ 5000. For further information refer to those Product Data Sheets. HyKote™ 5000 having a Solar Reflective Index of 107 enables the owner to maximize energy savings. To promote long lasting protection, HyKote™ 5000 is formulated to minimize ozone and UV radiation degradation vulnerability. HyKote™ 5000 is available in white, black, silver, light gray, clear, and custom colors in 5–gallon pails or 50–gallon (net by weight) drums.
Unless otherwise stated, results below are per California 2008 Building Energy Efficiency Standards Table 118-B
Colors not guaranteed against color shift.
| Phsycial State | Viscous liquid |
| Volatile Organic Content (g/l) | < 50 |
| Viscosity @ 77°F, cps | 5,000 +/-500 |
| Solar Reflectance Index (white only) | 107 [≥ 82] |
| Initial Solar Reflectivity | 0.85 [≥ 0.70] |
| Initial Thermal Emittance | 0.90 [≥ 0.75] |
| Shelf Life (in Unopened Container) | 2 years |