HyKote™ 500 WP BOND-Redi is a flexible, elastomeric, ready-to-use single component, fluid-applied, solvent based 100% rubber waterproofing membrane that is applied in a two-coat application process. HyKote™ 500 WP BOND-Redi is formulated to provide the tenacious adhesion necessary for fastener-free installation of insulation, drainage or protection panels. After allowing the membrane to properly cure (for 48 hours), the foundation can be backfilled.
HyKote™ 500 WP BOND-Redi is available in gray or green in 5–gallon pails or 50–gallon (net by weight) drums. HyKote™ 500 WP BOND-Redi is manufactured in our ISO 9001:2008 Registered facility located in Seville, Ohio.
HyKote™ WP 500 Bond-Redi is compliant with ICC, as it has passed the AC 29 requirements per an accredited independent laboratory.
AC 29 Acceptance Criteria for Cold, Liquid-Applied, Below Grade,
Exterior Damp proofing and Waterproofing Materials (Approved June 2011)
| Property | Test Method | Result | Requirement |
| Color1 | NA | Dark Gray or Green | —— |
| Asphalt Content1 | NA | 0.0% | —— |
| Thickness1 | ASTM D 3767 | 40 mils ( nominal ) | —— |
| Tensile Strength, Membrane1 | ASTM D 412 | 538.3 psi | —— |
| Elongation, Membrane1 | ASTM D 412 | 2,354.2 % | —— |
| Resistance to deterioration in contacting soil | ASTM E 154 (3 tests below) |
||
| Weight Loss ( % ) | ASTM E 96-00 | 2.3 | ≤ 10 |
| Water Vapor Permeance ( Perm ) | 0.1 | ≤ 1 | |
| Hydrostatic Pressure over cracks ( ft of water ) |
ASTM C 1306-95 | 69.3 | Report 50% of Lowest value |
| Resistance to Water [ Pass/Fail ] | ASTM D 2939 | Pass | No blistering or reemulsification |
| Remain in Place During Application [ Pass/Fail ] |
ASTM C 836 | Pass | As recommended by Mfg ± 5 mils |
| Adhesion-in-peel (after water immersion) ( lb/in ) | ASTM C 836 | 5.3 | ≥ 1 |
| Low Temperature Crack Bridging[ Pass/Fail ] | ASTM C 1305 | Pass | No Cracking |
| Extensibility after Heat Aging[ Pass/Fail ] | ASTM C 1522 / ASTM C 836 | Pass | No Cracking |
1Property Test Method Result Requirement